Khoom Description
A269 steel yeeb nkab yog nominal phab ntsa-thickness stainless hlau yeeb nkab siv nyob rau hauv dav corrosion-resistant, low-temperature los yog high-temperature ib puag ncig.
| Specification | ASTM A269 TP316L / ASME SA269 TP316L Tube |
| Cov duab | Hydraulic, Rectangular, Round, Honed Tubes, Square, Ncaj, U Shape, Coiled, Pan Cake Coils |
| Nto tiav | 400G, BA, 2B, No.8, No.1, No.4, No.3, 500G, 8K, 2D, 1D, 180G, 320G, HL, 400G Satin / Hairline, Daim iav Polished, 600G lossis 800G Daim iav tiav Tubing los yog Custom Finish raws li tus neeg siv khoom specification |
| Hom kev tsim khoom | CDS / Fabricated / Seamless / CDW / ERW / DOM / CEW / Welded / 100% X-Ray Welded |
| Thickness Ntau | SCH XXS, SCH 10, SCH 5, SCH 40, SCH XXH, SCH XS, SCH 80S, SCH 160, SCH 80 |
| Txuj | ASTM, GB, DIN, JIS, AISI, EN, SUS |
| Cov txheej txheem | Cold drawn, Txias dov, Extrusion, Kub dov Tube |
| Kev Xa Khoom | Polished, Cold Drawn, Annealed thiab Pickled (AP), MF, Bright Annealed (BA) |
| Xaus | Beveled End, Treaded, Plain End |
| Kev Pabcuam | Txiav, Decoiling, Khoov, Vuam, Punching, Moulding |
Chemical Composition Ntawm ASTM A269 TP 316L Seamless Tubes
| QIB |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
|
|---|---|---|---|---|---|---|---|---|---|---|
|
316L |
Min |
- |
- |
- |
- |
- |
16.0 |
2.00 |
10.0 |
- |
|
Max |
0.03 |
2.0 |
0.75 |
0.045 |
0.03 |
18.0 |
3.00 |
14.0 |
0.10 |
Mechanical Properties Ntawm ASTM A269 TP 316L ASTM A269 TP316L Stainless hlau Exhaust Tube
| QIB | TENSILE STR (MPA) MIN |
YIELD STR 0.2% PROOF (MPA) MIN |
ELONG (% IN 50MM) MIN |
HARDNESS | |
|---|---|---|---|---|---|
| ROCKWELL B (HR B) MAX | BRINELL (HB) MAX | ||||
|
316L |
485 |
170 |
40 |
95 |
217 |
ASME SA 269 TP316L Seamless Tube
